Skip to content

Hardware Inventory ​

Hardware Inventory groups endpoint hardware profiles.

Open Inventory > Hardware.

Find devices by hardware ​

Use Inventory → Hardware to find devices with a shared manufacturer, model, or hardware profile. This is useful for hardware investigations and deployment planning.

Detail View ​

Open a hardware profile to review its components and affected endpoints. Continue to an endpoint for its collected inventory and device-specific investigation.

Drive Health Limitations ​

Drive-health information is collected on a best-effort basis. The available values depend on the drive model, storage protocol, firmware, operating system, drivers, permissions, and the interfaces exposed by the device or storage controller.

Ordyn shows a value only when it can obtain and interpret that value with sufficient confidence. Unknown means that the value was unavailable or could not be interpreted reliably. It does not mean zero usage or confirm that the drive is healthy.

Use drive-health information as an observation rather than a definitive assessment or failure prediction. Maintain backups and use the drive manufacturer's diagnostic tools when validating a drive or investigating a suspected failure.

Intel AMT Status ​

Hardware details show whether the endpoint supports Intel AMT, along with its firmware version and enabled or provisioned state when available. An unknown value means Ordyn could not determine that state.

Linux inventory can report AMT support and firmware version. Provisioning and detailed firmware checks require a compatible Windows endpoint. See Intel AMT Endpoint Management for setup and management requirements.

Driver Planning ​

Hardware profiles help identify model families that need dedicated WinPE driver bundles. Pair this page with Driver Profiles when preparing OS deployment workflows.